Accurate blade alignment ensures your cuts remain smooth and precise and ensures you continue gleaning the best results from your table saw. Fortunately for us craftsmen, with the right information aligning our table saw blades to the saw's miter slot is a relatively simple exercise. With just a few simple steps and preliminary checks you can have that blade aligned and have confidence in the quality and accuracy of your cuts.
Preliminary Checks:
Before actually aligning the blade to the miter slot you should be certain the blade you'll be aligning is still in a favorable condition. Ensure its cleanliness, tightness, flatness, sharpness, and inspect its general wear. After inspecting and possibly cleaning or replacing the blade, ensure it is installed tightly and properly.
Saw Blade 10
Blade Alignment:
To begin aligning your table saw blade, you'll first want to raise the blade to its highest possible point. Choose a specific tooth on the blade to use as a reference point. You may choose any tooth on the blade and my also elect to mark it in some fashion (with a marker, piece of tape, or etc) to ensure total accuracy throughout the alignment process.
Next, rotate the blade forward moving the reference tooth towards the front en of the saw table. When your reference tooth becomes level with the front of the table, measure the distance between the reference tooth and the miter slot. Note the distance and rotate the blade in the opposite direction until the same reference tooth is level with the rear end of the saw table. Measure and note this distance as well.
If there is a difference in the two distances, adjust the saw accordingly. Your table saw's manual may have specific instructions with regard to this adjustment, as such it is recommended that you refer to it where adjustments are needed. Using the same reference tooth, repeat this measuring and noting process until the measured distances are the same.
Special Price!!! Freud D1050X Diablo 10-Inch 50-tooth ATB Combination Saw Blade with 5/8-Inch Arbor and PermaShield Coating
Oct 23, 2011 19:30:07
Click for larger image and other views
Freud D1050X Diablo 10-Inch 50-tooth ATB Combination Saw Blade with 5/8-Inch Arbor and PermaShield Coating Feature
- Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
- Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight
- Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life
- Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
- Laser cut arbor for accurate blade rotation reducing vibration and premature wear
Freud D1050X Diablo 10-Inch 50-tooth ATB Combination Saw Blade with 5/8-Inch Arbor and PermaShield Coating Overview
FREUD SAW BLADE *10" *50T *5/8" round, 13/16" arbor *For combination (crosscut/rip) cuts *Super thin laser cut kerf *"Red" Perma-Shield coated *Laser cut stabilizer vents *Micro grain titanium carbide *Laser cut heat expansion slotsFreud D1050X Diablo 10-Inch 50-tooth ATB Combination Saw Blade with 5/8-Inch Arbor and PermaShield Coating Specifications
For a multi-purpose blade that makes clean rips and crosscuts in both wood and wood composites, look no further than the Freud D1050X Diablo 10-Inch Combination Saw Blade. This is your go-to tool when one blade is needed for ripping and crosscutting. This blade's large gullet provides ample space for effective ripping, while its closely-grouped teeth achieve smooth crosscuts. For strong, long-lasting resistance, the blade features a tough steel plate and high-density carbide tips. |
 |
|
Makes Clean, Razor-Sharp Cuts in Wood and Wood Composites
Achieving premium results when ripping and crosscutting a mix of wood and wood composites is all about clean, accurate cuts. The Freud D1050X makes this process easy, fast, and precise. And its multi-purpose versatility minimizes blade changes between tasks, which ultimately saves you time.
The Freud D1050X's five blades are separated by large gaps and notched with closely-grouped teeth. This combination design offers you the high tooth count required for clean crosscutting, along with the large chip-removal space required for hassle-free ripping.
Contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for those projects that need just one blade to handle both ripping and crosscutting. This blade can be used to cut through wood and wood composites, such as particleboard and medium-density fiberboard (MDF).
Produces Smooth, Quiet Cuts with Laser-Cut Kerf
The Freud D1050X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 50 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.
An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.
Features Shock-Resistant Carbide for Long-Lasting Precision
So you can count on it over the long term, the Freud D1050X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.
Fits Miter and Table Saws
The Freud D1050X is a great addition to your workshop because it's designed with the versatility to fit a variety of miter and table saws.
This product is covered by Freud's Limited Lifetime Warranty.
What's in the Box
Freud D1050X Diablo 10-Inch Combination Saw Blade.
SAVE NOW on the special offers below!
Available In Stock. |
| This Freud D1050X Diablo 10-Inch 50-tooth ATB Combination Saw Blade with 5/8-Inch Arbor and PermaShield Coating ships for FREE with Super Saver Shipping. |
Price : Click to Check Update Prices Please. |
